The LabelOn™ Modular can be fitted with either a Wrap Conveyor module or an Orientation module to label a range of Cylindrical and slightly Tapered Round Products.
The same machine can also contain modules that would allow the of one or both sides of an Oval or Flat Bottle. The change-over from Round to Flat to Oval sided is QUICK and straight forward!.
The design of the LabelOn™ Modular machine allows for the of cylindrical Round and slightly Tapered Round products with the very simply addition of the Wrap or Orientation Module. The machine mechanics and electronics allow for the simply plug in of mechanics, electronics and sensors – providing a highly versatile range of configurations.
When flexibility and ease of operation are your production requirements, look at the LabelOn™ Modular Round Product Labelling Machine for your solutions.
Wrap Module Production speed : Up to 7200 pieces an hour.
Orientation Module Production speed : Up to 1800 pieces an hour.
- All Speeds Synchronised (Label Head, Wrap Conveyor and Main Conveyor)
- Labelling settings are entered and can be stored on the swivel mounted touch panel controls enabling access to the controls from BOTH sides of the machine.
- LabelOn™ Modular has tilt controls in two directions: towards and along the main conveyor
- Accepts slightly tapered Products where the usefulness of the two tilt directions adjustments supplied with the Label Head are utilised to their full
- Accepts Label Rolls Up to an O.D of 380mm (15”) with a Core I.D. 76mm (3”)
- Construction: SUS#304 and anodised Aluminium alloy.
- Quick change over to and from Round product to other configurations like Flat or Oval sided products within 10 minutes.
- Product Size: 25mm to 100mm diameter (other sizes upon request)
- Label Length/Width: 15 to 300mm. (other sizes upon request)
- Label Wrap: Up to 85% using the Wrap Module and Up to 100% using the Orientation Module.
- Label/Web Height: Max.155mm. (other sizes upon request)
- Label Dispensing Speed: Max. 30 m/min.
- Max Roll Diameter: 380mm (15”)
- Core Size Diameter: 76mm (3″)
- Air Requirements: 60 PSI only if fitted with a Hot Foil Coder Option or Orientation Module
- Electrical Requirements: 110 / 240 VAC, 50/60 Hz., Single phase (Other configurations available upon request)
- Hot Foil Coder
- Clear Label Gap Sensor
- Pneumatic Product Spacing Gate (This Optimises Speed with Orientation Module Labelling)